Help:Contents

From twofo wiki
Revision as of 15:24, 5 August 2007 by Astropoint (talk | contribs)
Jump to navigation Jump to search

Instructions for actually connecting your client to the hub can be found on the Connect page.

There is an excellent guide for 1st time users of DC++ at http://www.b.ali.btinternet.co.uk/DCPlusPlus/gettingStarted.html. The guide below gives instructions on setting up your internet connection and DC++ client to connect best to other users. Or else you can use the Duefo guide from 2 years ago, http://www.tma.dsl.pipex.com/dc/newbies.html [Under discussion, see main page discussion area]. Both give excellent helps for those new to DC++.

We also strongly advise the use of the latest version of standard DC++ as found at sourceforge (http://prdownloads.sourceforge.net/dcplusplus/DCPlusPlus-0.699.exe?use_mirror=kent). Earlier versions of DC often have security issues or problems downloading and mods of DC++ are often very unstable.


Whether you are on or off campus, you will need to make sure that any firewalls you may have are set to allow connections to and from DC++. To add an exception for DC++ on the Windows Firewall, go to Control Panel, Network Connections. Next right click on the connection you use to access the internet (Local Area Connection or Wireless Network Connection) and choose properties. Go to the Advanced tab and choose settings in the Windows Firewall. The Windows Firewall menu should appear. Finally, go to the Exceptions tab and choose add program; click browse and navigate to DC++ (C:\Program Files\DC++) and choose DCPlusPlus.exe. This should have added DC++ as an exception to the firewall so it will allow connections to and from it. Other firewalls should have manuals on the internet for settings up exceptions for programs.

Instructions for setting up your clients

Please note that if you have successfully connected to the hub, then ALL searching and downloading problems due to either your client/computer not being set up correctly or the person you are trying to download off being on the other side of the University firewall. (Him off campus whilst you are on campus for example)

On Campus Users please click here

Guides to firewalling out off campus connections when on campus


Off Campus Users please click here

Downloading and Uploading - Speeds

When downloading a file, you will get the best speed if both you and the other party are on campus. Up to 11MB/sec can be achieved this way. Much slower speeds will be obtained if one or both parties are off campus. If you are after new episodes of things, it is generally advisable to torrent them, rather than waiting for a slot off people on twofo. Off campus people can only expect speeds of probably up to and around 30kb/s. This is due to the limitations on the upload speed of a standard broadband connection these days

Downloading and Uploading - What works

Because of the way IP addresses are allocated on the Campus Residential Network, transferring files to/from addresses outside this network will NOT work the majority of the time. So in order to download from somebody when you are on Resnet, the other person must also be on the Resnet. The library and University House along with all other parts of main campus do not count as Resnet and as such you cannot download from people on Resnet from these locations. Active mode is strongly recommended as this allows you to connect to the maximum number of people. If you are in Passive mode then you are unable to download from anybody else in passive mode. This is typically around 10% of those on campus and 40% of those off campus. There are excellent guids to setting up your client to use active mode successfully on the Help page of this wiki

Why is passive mode so bad?

In passive mode, DC++ will only make outbound connections to other users. All searches will be sent through the hub, and search results will be returned through the hub as well. DC++ will return a maximum of 5 search hits for a passive user. Passive users cannot download from other passive users. Passive mode is an extra strain on hubs, so please do not use it unless you must. DC++ users in passive mode will have M:P in their DC++ tag.

That being said, active mode on DC++ will make inbound and outbound connections to other users. All searches will be sent through the hub, and search results will be returned directly from active mode users and through the hub for the passive users. Active users can download from either active and passive users. Obviously, that means you can connect to a larger group of people.