DC++ 0.68 was released a few days ago.
Unfortunately, one of the changes made means twofo, and any other hub running Open DC Hub, may not let you connect.
If you want to use this version, the simplest way to work around this is to set "Max upload speed" to 2 or 5 (which will probably end up displayed as "28.8kbps" and "56kbps").
Alternatively, you can edit the DCPlusPlus.xml file with any text editor, and change the value of the "UploadSpeed" setting to one of the old values (DSL, Cable, LAN(T3) ...)
DC++ 0.68
Moderator: Operators
Here's a simple patch for Open DC Hub 0.7.14 which should allow people to connect with any value in the "Connection speed" setting
I've not tested it extensively.
Code: Select all
diff -Naur opendchub-0.7.14.orig/src/commands.c opendchub-0.7.14/src/commands.c
--- opendchub-0.7.14.orig/src/commands.c 2006-01-31 14:45:28.000000000 +0000
+++ opendchub-0.7.14/src/commands.c 2006-01-31 14:46:04.000000000 +0000
@@ -1165,7 +1165,8 @@
user->con_type = 8;
break;
default:
- return 0;
+ user->con_type = 68;
+ break;
}
/* Set flag */
diff -Naur opendchub-0.7.14.orig/src/main.c opendchub-0.7.14/src/main.c
--- opendchub-0.7.14.orig/src/main.c 2006-01-31 14:45:28.000000000 +0000
+++ opendchub-0.7.14/src/main.c 2006-01-31 14:45:37.000000000 +0000
@@ -703,6 +703,9 @@
case 9:
sprintfa(send_buf, "LAN(T3)");
break;
+ default:
+ sprintfa(send_buf, "Unknown");
+ break;
}
sprintfa(send_buf, "%c", from_user->flag);
sprintfa(send_buf, "$");