CA

Run "DC++" on your computer and then open "CA Personal Firewall". You will need to allow

1. "DCPlusPlus.exe" by right-clicking on it and selecting “Allow”.
   
2. Select "DCPlusPlus.exe" and click on "Edit".
   
3. Step 1: Name and Enable the rule. Set Protocol & Port as "Specify Directly", Access as "Prevent", Protocol as "TCP and UDP" and Direction as "In/Out".
   
4. Step 2: Nothing modified in "My Computer" tab.
   
5. Step 3: Under Remote Computer select IP Address as "Specify Directly" and the first range should start at "1.0.0.0" and end at “127.0.0.0"
   
6. Step 4:No changes under Restrictions, and click OK.
   
7. Follow steps 3 and 4 as above and the second range should start at "127.0.0.2" and end at "137.205.0.0"
   
8. Follow steps 3 and 4 as above and the second range should start at "137.206.0.0" and end at "255.255.255.255"
   
   
9. Finally, add one more rule to allow connections to other people on Resnet as below.
   
   
   

Finally, you must restart the CA Security centre before any of these rules actually take effect.