Page 1 of 1
Can't get Valknut to work
Posted: Fri Jul 28, 2006 6:38 pm
by ziggy
Hi,
I can connect using valknut but after the connected message there is nothing else. I am in active mode. I have enabled SSL for twofo. Im running ubuntu.
Thanks
Ziggy
Posted: Fri Jul 28, 2006 8:47 pm
by xyzzy
Make sure you're connecting to hub.twofo.co.uk:4146.
You probably need to recompile dclib after applying the patch here:
http://dcgui.berlios.de/forum/viewtopic.php?t=3390
If you can't recompile dclib, you'll need to setup stunnel instead.
Posted: Sun Jul 30, 2006 4:46 pm
by Zeus
stunnel is for on-campus users *only* so stop using it fuckface
Posted: Mon Jul 31, 2006 7:46 pm
by cocodude
That's policy hasn't really been made strongly officially, Zeus. I highly recommend people use stunnel only on campus though.
Cocodude
Posted: Mon Jul 31, 2006 8:17 pm
by Zeus
as u know, i just felt like being rude to cockmunch there, seeing as he uses stunnel for no reason.
Posted: Mon Jul 31, 2006 9:02 pm
by cocodude
If I didn't realise how it looked from the other side (i.e. everyone appearing as localhost), I'd be using stunnel too for encryption purposes.
Cocodude
Posted: Mon Jul 31, 2006 9:11 pm
by astropoint
It only encrypts the connection to the hub, not any actual transfers though
Posted: Mon Jul 31, 2006 10:11 pm
by BigG
Indeedy - you can still tell exactly where you are connected to and everything