STunnel setup

Jon McClane · Post by **Jon McClane** » Wed Apr 23, 2008 2:04 pm

Hi guys

When I was trying to install STunnel, it gave the following error message:

Stunnel server is down due to an error
You need to exit and correct the problem

The log file elaborates slightly, but basically it won't run.

Any help on this problem would be greatly appreciated.

Jon McClane

Post by **astropoint** » Wed Apr 23, 2008 2:45 pm

Did you get the stunnel off the twofo website?
http://www.twofo.co.uk/resources/stunnel.zip Just extract the files and run stunnel.exe, you should not be installing anything as such. This is the ONLY version that will work for twofo.

If you did, try restarting stunnel on your computer, the server was reset earlier today so it may have just gotten stuck on that. If neither of those work, can you paste in anything else the log is showing up.

Jon McClane · Post by **Jon McClane** » Wed Apr 23, 2008 3:31 pm

Ok, I found the problem - firewall was blocking DC++

It's fixed now, thanks for the help

Rampage · Post by **Rampage** » Wed Apr 23, 2008 8:48 pm

You might also want to turn off segmented downloading. see www.twofo.co.uk 2nd post